G6 L4-2.4L VIN B (2006)
7. Identify the center cross car hog ring tie down (1) on the seat cushion cover. Using side cutters, cut of 17 mm (0.669 in) - 20 mm (0.788 in) from
each end of the hog ring tie down as shown above (2).
8. Re-assemble the seat. Refer to Inflatable Restraint Passenger Presence System Replacement - Front (IEE System) in SI.
9. Perform the Passenger Presence System Preload Test (PPS Setup). Refer to Passenger Presence System Preload Test (PPS Setup) in SI.
