G6 L4-2.4L VIN B (2006)
Torque Converter Clutch Solenoid: Service and Repair
4T45-E - Automatic Transaxle
Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid Replacement
Replacement Procedure
Important: Retainer clips hold in each of the valve line-ups. Use a small screwdriver in order to remove the retainer clips. Be careful not to score the
valve body when removing the retainer clips and valves. Before removing the valve line-ups, inspect each valve line-up for freedom of movement.
1. Remove the transmission side cover.
2. Remove the TCC solenoid retainer clip (304), the TCC solenoid (335), with two O-rings (337, 338), and screen, the TCC regulated apply valve
(339) and the spring (340).
Installation Procedure
1. Install the spring (340), the TCC regulated apply valve (339), the TCC solenoid (335) with two O-rings (337 and 338) and screen, and the TCC
solenoid retainer clip (304).
2. Install the transmission side cover.
