G6 L4-2.4L VIN B (2006)
5. Install the transmission mount to bracket through bolt and nut.
Tighten the bolt and nut to 90 Nm (66 ft. lbs.).
6. Remove the jack stand.
7. Install the left tire and wheel.
8. Lower the vehicle.
Transmission Mount Replacement - Left
Transmission Mount Replacement - Left
Removal Procedure
1. Raise and support the vehicle.
2. Remove the left front tire and wheel.
3. Remove the left splash shield.
4. Using a suitable floor jack and block of wood, support the powertrain.
5. Remove the transaxle mount lower nuts from the frame.
6. Remove the transmission mount upper nuts from the transmission mount bracket.
7. Use the floor jack to raise the powertrain enough to remove the transmission mount.
8. Remove the transaxle mount from the frame.
Installation Procedure
1. Install the transaxle mount to the frame.