G6 L4-2.4L VIN B (2006)
5. Remove the TFP switch assembly bolts and remove the switch assembly from the control valve body. The 7 TFP switch O-rings are reusable if not
damaged and should remain with the pressure switch assembly.
6. Remove the remaining control valve body bolts and remove the control valve body assembly.
7. Remove and discard the valve body-to-spacer plate gasket.
8. Remove the spacer plate support bolts and remove the spacer plate support.
9. Important: Checkballs may fall out of the channel plate assembly. Retain the checkballs with petroleum jelly.
Remove the spacer plate with the spacer plate filter attached.
10. Remove and discard the spacer plate-to-channel plate gasket.
