G6 L4-2.4L VIN B (2006)
5. Notice: Refer to Fastener Notice in Service Precautions.
Install the valve body bolts (374-381, 384).
^
Tighten the M6 X 1.0 X 20 bolt (381) to 8 Nm (70 inch lbs.).
^
Tighten the M6 X 1.0 X 30 bolt (376) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 45 bolt (377) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 55 bolt (378) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 60 bolt (375) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 65 bolt (374) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 85 bolt (384) to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 90 bolt (379) to 16 Nm (12 ft. lbs.).
^
Tighten the M8 X 1.0 X 90 bolt (380) to 25 Nm (18 ft. lbs.).
6. Install the oil pump.
7. Install the case side cover.
Oil Weir Replacement
Oil Weir Replacement
Removal Procedure
1. Remove the case side cover.
2. Remove the oil reservoir weir (27).
Installation Procedure