G6 L4-2.4L VIN B (2006)
Tighten the transaxle range switch bolts.
Tighten the range switch bolts to 20 Nm (15 ft. lbs.).
6. Remove the alignment tool.
7. Install the transaxle range switch lever and nut
Tighten the transaxle range switch lever retaining nut to 35 Nm (26 ft. lbs.).
8. Important: After adjusting the switch, verify the engine only starts in Park or Neutral. If the engine starts in any other position, adjust the switch.
Connect the transaxle range switch electrical connectors.
9. Install the shift control cable to transaxle range switch lever and verify proper operation.
10. Install the shift control cable to transaxle range switch lever and verify proper operation.
Installation Procedure (New Switch)
