G6 V6-3.5L (2009)
Rear Bumper Reinforcement: Service and Repair
Rear Bumper Impact Bar Replacement
Removal Procedure
1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Sedan) (See: Rear Bumper Cover / Fascia/Service and Repair/Rear
Bumper Fascia Replacement (Sedan))Rear Bumper Fascia Replacement (Coupe/Convertible) (See: Rear Bumper Cover / Fascia/Service and
Repair/Rear Bumper Fascia Replacement (Coupe/Convertible)).
2. Disconnect the wiring harness from the rear bumper impact bar.
3. Remove the nuts from the rear bumper impact bar.
4. Remove the bolts from the rear bumper impact bar.
5. Remove the rear bumper impact bar from the vehicle.
6. Remove the stud plates from the rear bumper impact bar, if required.