G6 V6-3.5L (2009)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service and Repair).
2. Remove the plenum-to-hood seal. Refer to Seal Replacement - Plenum to Hood (See: Doors, Hood and Trunk/Hood/Hood Weatherstrip/Service
and Repair).
3. Remove the windshield washer hose. Refer to Windshield Washer Hose Replacement (See: Wiper and Washer Systems/Windshield Washer
Hose/Service and Repair).
4. Remove the push-pin fasteners from the air inlet grille panel.
5. Remove the air inlet grille panel from the vehicle.
Installation Procedure