G6 V6-3.5L (2009)
Convertible Top Control Module: Service and Repair
Folding Top Control Module Replacement
Removal Procedure
Warning: Refer to Eye Protection Warning (See: Service Precautions/Technician Safety Information/Eye Protection Warning).
Warning: Refer to Folding Top Hydraulic Pressure Warning (See: Roof and Associated Components/Convertible Top/Service
Precautions/Folding Top Hydraulic Pressure Warning).
Warning: Refer to Servicing Electrical Components Warning (See: Service Precautions/Technician Safety Information/Servicing Electrical
Components Warning).
1. Place the folding top in the up position.
2. Open the rear compartment.
3. Remove the right side compartment trim. Refer to Rear Compartment Side Trim Replacement - Right Side (Coupe/Sedan) (See: Interior
Moulding / Trim/Trim Panel/Service and Repair)Rear Compartment Side Trim Replacement - Right Side (Convertible) (See: Interior Moulding /
Trim/Trim Panel/Service and Repair).
4. Remove the 2 nuts that attach the control module to the pump bracket.
5. Disconnect the electrical connectors from the control module.
6. Remove the control module from the pump bracket.
Installation Procedure
1. Position the control module to the pump bracket.
