G6 V6-3.5L (2009)
15. Remove the BPMV bolt (1).
16. Remove the BPMV from the bracket (1).
17. Inspect the BPMV bracket insulator for damage and replace, if necessary.
18. If installing a new BPMV, remove the EBCM. Refer to Electronic Brake Control Module Replacement (See: Electronic Brake Control
Module/Service and Repair).
Installation Procedure
Note: When installing a new BPMV, do NOT remove the shipping plugs from the pipe ports until after installation into the vehicle.
1. Install the EBCM, if removed. Refer to Electronic Brake Control Module Replacement (See: Electronic Brake Control Module/Service and
Repair).