G6 V6-3.5L (2009)
3. Remove the brake pad retainers (2) from the brake caliper bracket.
4. If reusing the bracket, thoroughly clean the pad hardware mating surfaces (1) of the caliper bracket, of any debris and corrosion.
5. Inspect the disc brake pad retainers (2) for the following:
*
Bent mounting tabs
*
Excessive corrosion
*
Looseness at the brake caliper mounting bracket
*
Looseness at the disc brake pads
6. If any of the conditions listed are found, the disc brake pad retainers require replacement.
7. Remove the brake caliper mounting bracket bolts (1).
8. Remove the brake caliper bracket from the steering knuckle.
