G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 4 park brake lever assembly retaining nuts.
*
Tighten the front 2 nuts to 27 Nm (20 lb ft).
*
Tighten the rear 2 nuts to 10 Nm (89 lb in).
4. Install the shift assembly. Refer to Transmission Control Replacement (See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Shifter A/T/Service and Repair/4T45-E - Automatic Transmission/Transmission Control Replacement).
5. Connect the electrical connector (1) to the park brake warning lamp switch.
6. Install the console support bracket. Refer to Floor Console Bracket Replacement (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair).
7. Install the front floor console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).
8. Fully apply and release the park brake lever 3-5 times.