G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Tighten the rocker arm cover bolts.
Tighten the bolts to 10 Nm (89 lb in).
6. Install the ignition coil assembly. Refer to Ignition Coil Replacement (See: Powertrain Management/Ignition System/Ignition Coil/Service and
Repair).
7. Connect the engine wiring harness electrical connector (2) to the fuel injector wiring harness electrical connector.
8. Connect the engine wiring harness electrical connector (1) to the MAP sensor.
9. Install the PCV fresh air tube to the right rocker arm cover.