G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Tighten the transmission mount bracket to transmission bolts using the following sequence:
1. Rear bolt
2. Middle bolt
3. Front bolt
Tighten the bolts to 50 Nm (37 lb ft).
9. Tighten the engine mount strut to engine mount strut bracket bolts (1).
Tighten the bolts to 50 Nm (37 lb ft).
10. Remove the floor jacks.
11. Rock the powertrain vigorously from front to rear and allow the powertrain to settle.