G6 V6-3.5L (2009)
Oil Pressure Sensor: Service and Repair
Engine Oil Pressure Sensor and/or Switch Replacement
Removal Procedure
1. Disconnect the battery negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the electrical connector from the engine oil pressure sensor.
Engine Oil Pressure Switch
3. Remove the engine oil pressure switch.
Installation Procedure
Engine Oil Pressure Switch
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the engine oil pressure switch.
Tighten the switch to 16 Nm (12 lb ft).
2. Install the electrical connector to the engine oil pressure switch.
3. Connect the battery negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).