G6 V6-3.5L (2009)
1. If removed, install the throttle body. Refer to Throttle Body Assembly Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Throttle Body/Service and Repair/Removal and Replacement).
2. Install the upper intake manifold gaskets.
3. Install the upper intake manifold.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the right upper intake manifold bolts and the stud.
Tighten the bolts and the stud to 25 Nm (18 lb ft).
5. Install the EGR valve. Refer to Exhaust Gas Recirculation Valve Replacement (See: Powertrain Management/Emission Control Systems/Exhaust
Gas Recirculation/EGR Valve/Service and Repair).
6. Install the MAP sensor bracket and the sensor. Refer to Manifold Absolute Pressure Sensor Replacement (See: Powertrain
Management/Computers and Control Systems/Manifold Pressure/Vacuum Sensor/Service and Repair).