G6 V6-3.5L (2009)
7. Install the EVAP canister purge solenoid valve. Refer to Evaporative Emission Canister Purge Solenoid Valve Replacement (See: Powertrain
Management/Emission Control Systems/Evaporative Emissions System/Canister Purge Solenoid/Service and Repair).
8. Install the ignition coil bracket with the coils. Refer to Ignition Control Module Replacement (See: Powertrain Management/Ignition
System/Ignition Control Module/Service and Repair).
9. Install the following wiring harnesses to the retainers:
*
Engine wiring harness
*
Left side spark plug wire harness
*
CMP sensor wiring harness
10. Install the left side spark plug wires to the spark plugs. Refer to Spark Plug Wire Replacement (See: Tune-up and Engine Performance
Checks/Ignition Cable/Service and Repair).
11. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
12. Connect the electrical connectors to the following:
*
EVAP canister purge valve
*
Electronic throttle control
*
IAT sensor
*
MAF sensor
*
EGR valve
13. Install the vacuum hoses to the following:
*
Heater and A/C source
*
Brake booster
*
Manifold vacuum source
*
EVAP canister purge valve
14. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
15. Fill the cooling system. Refer to Cooling System Draining and Filling (LY7, LZE, LZ4, LZ9) (See: Cooling System/Service and Repair)Cooling
System Draining and Filling (GE 47716 Fill) (See: Cooling System/Service and Repair)Cooling System Draining and Filling (LE5 Static Fill) (
See: Cooling System/Service and Repair).
16. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: ).
