G6 V6-3.5L (2009)
Timing Chain: Service and Repair
Camshaft Timing Chain and Sprocket Replacement
Special Tools
EN-47719 Tensioner Compressor
Removal Procedure
1. Remove the engine front cover. Refer to Engine Front Cover Replacement (See: Timing Cover/Service and Repair).
2. Align the crankshaft timing mark (1) to the timing mark on the bottom of the timing chain tensioner (2).
3. Align the timing mark on the camshaft position actuator gear (4) with the timing mark on top of the timing chain tensioner (3).
4. Remove the camshaft position actuator bolts.
5. Remove the timing chain, camshaft position actuator, and crankshaft sprockets.
