G6 V6-3.5L (2009)
1. Install the exhaust manifold heat shield.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the exhaust manifold heat shield bolts and tighten to 10 Nm (89 lb in).
3. Install the bank 1 sensor 1 HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (See: Powertrain Management/Computers and
Control Systems/Oxygen Sensor/Service and Repair).
