G6 V6-3.5L (2009)
Air Door Actuator / Motor: Service and Repair
HVAC - Manual
Temperature Valve Actuator Replacement
Removal Procedure
1. Remove the fuse labeled HVAC CTRL (BATT).
2. Completely open the instrument panel (I/P) compartment door by pressing both tabs that support the stop bumpers. Refer to Instrument Panel
Compartment Replacement (See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair).
3. Remove the air temperature actuator screws.
4. Remove the air temperature actuator.
5. Disconnect the air temperature actuator electrical connector.
Installation Procedure
1. Connect the air temperature actuator electrical connector.