G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Tighten the blower motor resistor screws.
Tighten the screws to 1.5 Nm (13 lb in).
3. Install the blower motor resistor wire harness connector.
4. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
