G6 V6-3.5L (2009)
Control Module HVAC: Service and Repair
HVAC - Manual
HVAC Control Module Replacement
Removal Procedure
1. Remove the instrument panel (I/P) center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
2. Remove the HVAC control module screws.
3. Remove the HVAC control module.
4. Remove the HVAC control module wire harness connectors.
Installation Procedure
Note: The key should be in the OFF position when connecting the electrical connectors to ensure proper calibration.
1. Install the HVAC control module wire harness connectors.