G6 V6-3.5L (2009)
Parking Light Bulb: Service and Repair
Parking and Turn Signal Lamp Bulb Replacement
Removal Procedure
Warning
Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal
injury:
*
Turn off the lamp switch and allow the bulb to cool before changing the bulb.
*
Leave the lamp switch OFF until the bulb change is complete.
*
Always wear eye protection when changing a halogen bulb.
*
Handle the bulb only by its base. Avoid touching the glass.
*
Keep dirt and moisture off the bulb.
*
Properly dispose of the used bulb.
*
Keep halogen bulbs out of the reach of children.
1. Open the hood.
Note: Hold the headlamp to prevent damage to the headlamp or to the fascia.
2. Remove the bolts from the headlamp assembly.
3. Remove the push-in-retainers across the front fascia.
4. Pull the headlamp forward to release the locating tab from the front of the fender, then lift the headlamp up to release from vehicle.
