G6 V6-3.5L (2009)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Turn Signal Multifunction Switch Replacement
Removal Procedure
1. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
2. Disconnect any electrical connectors as needed.
3. Release and remove the turn signal multifunction switch.
Installation Procedure
1. Install and secure the turn signal multifunction switch.
2. Connect any electrical connectors as needed.
