G6 V6-3.5L (2009)
Coolant Line/Hose: Service and Repair
Engine Coolant Crossover Pipe Replacement
Engine Coolant Crossover Pipe Replacement (LZE, LZ4) (3.5L)
Removal Procedure
1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
2. Remove the generator. Refer to Generator Replacement (LE5) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (LY7) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (LZ4) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (LZ9) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement).
3. Remove the drive belt idler pulleys. Refer to Drive Belt Idler Pulley Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts,
Mounts, Brackets and Accessories/Idler Pulley/Service and Repair).
4. Remove the power steering pump. Refer to Power Steering Pump Replacement (LZ4, LZ9) (See: Steering and Suspension/Steering/Power
Steering/Power Steering Pump/Service and Repair).
5. Reposition the radiator surge tank inlet hose clamp (1) at the surge tank inlet pipe.
6. Remove the radiator surge tank inlet hose from the inlet pipe. Position the hose out of the way.
