G6 V6-3.5L (2009)
Ignition Coil: Service and Repair
Ignition Coil Replacement
Removal Procedure
1. Note the position of the spark plug wires for the installation and disconnect the spark plug wires from the ignition coil and module assembly.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
3. Remove the 4 screws securing the ignition coil and module assembly to the bracket.
4. Remove the ignition coil and module assembly.
Installation Procedure
1. Install the ignition coil and module assembly to the bracket.