G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the ignition coil and module assembly screws.
Tighten the screws to 4.5 Nm (40 lb in).
3. Connect the spark plug wires as noted during the removal.
4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
5. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning) for programming and setup information.
