G6 V6-3.5L (2009)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Switch Lock Cylinder Replacement
Removal Procedure
1. Remove the knee bolster. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
2. Turn ignition switch to the run position.
3. Push the ignition lock cylinder tab.
4. Remove the ignition lock cylinder.
Installation Procedure
Important: If you are installing a new lock cylinder, refer to Key and Lock Cylinder Coding (See: Procedures).
