G6 V6-3.5L (2009)
Fuel Pressure Release: Service and Repair
Fuel Pressure Relief (Without CH 48027)
Fuel Pressure Relief (Without CH 48027)
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Fuel Delivery and Air Induction/Fuel/Service Precautions).
Warning: Refer to Relieving Fuel Pressure Warning (See: Fuel Pressure/Service Precautions).
1. If the fuel system requires repair, prevent fuel spillage by removing the fuel pump fuse. Refer to Electrical Center Identification Views (See:
Maintenance/Fuses and Circuit Breakers/Fuse/Application and ID).
2. Loosen the fuel fill cap in order to relieve the fuel tank vapor pressure.
3. Remove the engine cover, if required.
4. Remove the fuel rail service port cap.
5. Wrap a shop towel around the fuel rail service port and using a small flat-bladed tool, depress (open) the fuel rail test port valve.
6. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
7. Install the fuel rail service port cap.
8. Install the engine cover, if required.
9. Tighten the fuel fill cap.
