G6 V6-3.5L (2009)
4. Remove the communication interface module.
Installation Procedure
1. Install the communication interface module.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Tighten the communication interface module bolts.
Tighten the bolts to 10 Nm (89 lb in).
3. When replacing the Communication Interface Module be sure to transfer Bluetooth Antenna, if equipped.
4. Connect the communication interface module wire harness and antenna connectors.
5. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
