G6 V6-3.5L (2009)
Note: The new SIR steering wheel module coil will be pre-centered. Do not remove the centering tab from the new coil until the installation is
complete.
3. Slide the new SIR steering wheel module coil (2) onto the steering column (1).
4. Connect the SIR steering wheel module coil electrical connectors.
5. Remove and discard the centering tab from the new SIR steering wheel module coil.
6. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
7. Install the steering wheel. Refer to Steering Wheel Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Wheel Replacement).