G6 V6-3.5L (2009)
1. Install the front end sensor to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 2 integral bolts that retain the front end sensor to the frame front crossmember.
Tighten the bolts to 8 Nm (71 lb in).
3. Connect the sensor electrical connector to the front end sensor.
4. Install the CPA to the sensor electrical connector.
5. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Inlet Duct Replacement).
6. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair).
