G6 V6-3.5L (2009)
Brake Light Switch: Service and Repair
Brake Pedal Position Sensor Replacement
Brake Pedal Position Sensor Replacement
Removal Procedure
1. Remove the closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
2. Remove the steering wheel stub shaft bolt and position the steering wheel stub shaft away from the steering column in order to gain access to the
brake pedal adjustment position sensor. Refer to Intermediate Steering Shaft Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Intermediate Steering Shaft Replacement).
3. Remove the electrical connector from the brake pedal position sensor.
4. Remove the bolt from the position sensor, and remove the position sensor from the vehicle.
Installation Procedure