G6 V6-3.5L (2009)
4. Insert the J 41545 as shown and rotate the switch until the tool drops onto position.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Tighten the transaxle range switch bolts to 20 Nm (15 lb ft).
6. Remove the alignment tool.
7. Install the transaxle range switch lever and nut and tighten the nut to 35 Nm (26 lb ft)
Note:
After adjusting the switch, verify the engine only starts in Park or Neutral. If the engine starts in any other position, adjust the switch.
