G6 V6-3.5L (2009)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement
Removal Procedure
1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (With LY7) (See: Battery/Battery Cable/Negative/Service and
Repair)Battery Negative Cable Replacement (With LE5) (See: Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable
Replacement (LZ9) (See: Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Replacement (LZ4) (See: Battery/Battery
Cable/Negative/Service and Repair).
2. Ensure that the location measurement of the battery current sensor was recorded for reference during installation.
3. Squeeze the ground ends of the negative battery cable together and remove the sensor (1) from the cable.
Installation Procedure
Important: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.