G6 V6-3.5L (2009)
5. Install the 3 trailing arm to knuckle bolts (1).
Tighten the trailing arm to knuckle bolts to 180 Nm (133 lb ft).
6. Install the lower shock to knuckle bolt. Refer to Shock Absorber Replacement (See: Suspension/Suspension Strut / Shock Absorber/Service and
Repair/Rear Suspension Shock Absorber/Shock Absorber Replacement).
7. Install the upper control arm to knuckle bolt. Refer to Rear Axle Upper Control Arm Replacement (See: Suspension/Control Arm/Service and
Repair/Rear Suspension/Rear Axle Upper Control Arm Replacement).
8. Install the lower control arm to knuckle bolt and the support bolt. Refer to Rear Axle Lower Control Arm Replacement (See: Suspension/Control
Arm/Service and Repair/Rear Suspension/Rear Axle Lower Control Arm Replacement).
9. Install the toe link to knuckle bolt and nut. Refer to Rear Suspension Link Replacement - Toe Link (See: Suspension/Rear Knuckle Alignment
Link/Service and Repair).
10. Install the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement (See: Suspension/Wheel Bearing/Service and
Repair/Rear Suspension).
11. Install the brake caliper and bracket assembly on the knuckle. Refer to Rear Brake Caliper Bracket Replacement (See: Brakes and Traction
Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Rear Brake Caliper Bracket Replacement).
12. Install the rear park brake cable to the park brake actuator. Refer to Parking Brake Rear Cable Replacement (See: Brakes and Traction
Control/Parking Brake System/Parking Brake Cable/Service and Repair).
13. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
14. Lower the vehicle.
15. Perform a vehicle wheel alignment. Refer to Wheel Alignment Measurement (See: Alignment/Service and Repair/Wheel Alignment
Measurement).
