G6 V6-3.5L (2009)
9. Position the front engine lift bracket (2) and install the 3 bolts (1).
Tighten the engine lift bracket bolts to 50 Nm (37 lb ft).
10. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts,
Brackets and Accessories/Idler Pulley/Service and Repair) for 3.5L engine or Drive Belt Idler Pulley Replacement (See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Idler Pulley/Service and Repair) for 3.9L engine.
11. Install the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement (LY7) (See: Power Steering Pump/Service and Repair
)Power Steering Pump Pulley Replacement (LZ4, LZ9) (See: Power Steering Pump/Service and Repair)
12. Install the drive belt from the vehicle. Refer to Drive Belt Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets
and Accessories/Drive Belt/Service and Repair) for the 3.5L engine or Drive Belt Replacement (Coupe) ()Drive Belt Replacement (Convertible)
() for the 3.9L engine.
13. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) for 3.5L engine or Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) for 3.9L engine.
14. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
