G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Connect the inlet pipe (2) and outlet pipe (4) to the steering gear (3) and install the power steering gear inlet/outlet pipe retaining bolt (1). Prior to
tightening the retaining bolt (1), rotate the outlet pipe (4) clockwise/down so it touches the inlet pipe (2). Verify the hoses are still touching after
the retaining bolt is tight.
Tighten the retaining bolt to 27 Nm (20 lb ft).
5. Install the 2 power steering gear inlet pipe routing pin-style retainers to the front of the frame.
