G6 V6-3.5L (2009)
3. Install the 3 trailing arm to knuckle bolts (1).
Tighten the 3 trailing arm to knuckle bolts to 180 Nm (133 lb ft).
4. Install the rear parking brake cable routing bolt to the trailing arm.
Tighten the routing bolt to 10 Nm (89 lb in).
5. Install the 2 trailing arm bracket to body bolts.
Tighten the bracket to body bolts to 90 Nm (66 lb ft) plus 30 degrees plus an additional 15 degrees.
6. Install the rear axle tie rod bracket brace. Refer to Rear Axle Tie Rod Bracket Brace Replacement (See: Steering/Tie Rod/Service and
Repair/Rear Suspension).
7. Install the rear frame brace. Refer to Frame Brace Replacement (See: Body and Frame/Frame/Structural Brace/Service and Repair).
8. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
9. Lower the vehicle.
