G6 V6-3.5L (2009)
8. Place trailing arm and bracket as an assembly on a work bench.
9. Remove the trailing arm to bracket bolt and nut.
10. Separate the trailing arm bracket from the trailing arm.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position the trailing arm to the bracket, install the bolt and nut.
Tighten the trailing arm to bracket through bolt and nut to 60 Nm (44 lb ft) plus 60 degrees.
2. Position the trailing arm and bracket assembly to the vehicle.
3. Connect the park brake cable routing clip to the trailing arm bracket.
