G6 V6-3.5L (2009)
2. Install the servo spring (49).
3. Install the servo assembly (42 - 48).
4. Install the reverse servo cover (40) with new O-ring seal (41).
5. Depress the reverse servo cover.
6. Install the snap ring (39).
7. Install the battery. Refer to Battery Replacement (See: Starting and Charging/Battery/Service and Repair).
Important: It is recommended that the transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan
tool will erase all learned values in all cells. As a result, the engine control module (ECM), powertrain control module (PCM) or
transmission control module (TCM) will need to relearn the TAP values. Transmission performance may be affected as new TAP values
are learned. Reset the TAP values. Refer to Transmission Adaptive Functions (See: Description and Operation/4T65-E - Automatic
Transmission/Transmission Adaptive Functions).
8. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
