G6 V6-3.5L (2009)
1. Install the oil pan gasket (25).
2. Install the oil pan (24).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the oil pan bolts (23).
Tighten the bolts to 14 Nm (10 lb ft).
4. Lower the vehicle.
Caution: Refer to Transmission Overfill Caution (See: Service Precautions/Transmission Overfill Caution).
5. Fill the transaxle with DEXRON(R) VI. Refer to Fluid Capacity Specifications (See: Specifications/Capacity Specifications).
6. Place the gear selector in the PARK position.
7. Start the engine.
8. Run the engine at a slow idle. Do NOT race the engine.
9. Adjust the fluid level. Refer to Transmission Fluid Check (See: Testing and Inspection/Symptom Related Diagnostic Procedures/4T65-E -
Automatic Transmission/Transmission Fluid Check).
10. Inspect for leaks.
