G6 V6-3.5L (2009)
Parking Lock Cable: Service and Repair
4T45-E - Automatic Transmission
Park Lock Cable Replacement
Removal Procedure
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair).
2. Remove the console. Refer to Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair).
3. Place the transaxle shift control lever in the PARK position.
4. Turn the ignition key to the RUN position.
Remove the park lock cable end (2) from the park lock lever by sliding the cable end reward off the park lock lever pin.
5. Release the park lock cable retainer (1) from the shift control base.
6. Remove the knee bolster. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair) and Knee Bolster Bracket Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
