G6 V6-3.5L (2009)
Warning
Hold the transmission range selector lever while removing or installing the lever retaining nut. Excessive torque on the manual shaft can damage the
detent lever hub retainer which could allow the vehicle to roll when placed in the park position.
1. Install the transmission range selector lever (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission range selector lever nut (1) and tighten to 20 Nm (15 lb ft).
3. Install the transmission range selector lever cable (2) to the cable bracket.
4. Connect the transmission range selector lever cable terminal (1) to the transmission manual shift lever pin.
5. Check the range selector cable adjustment. Refer to Range Selector Lever Cable Adjustment (See: Shift Linkage/Shift Cable/Adjustments).
