G6 V6-3.5L (2009)
1. Install the 3 input speed sensor seals (1).
2. Install the input speed sensor (3).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the input speed sensor bolt (2) M6 x 23 and tighten to 12 Nm (106 lb in).
4. Connect the input speed sensor electrical connector (1).
5. Install the transmission control valve body cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and
Repair/6T40/6T45 - Automatic Transmission/Control Valve Body Cover Replacement).
Perform the service fast learn adapt procedure. Refer to Service Fast Learn Adapts (See: Testing and Inspection/Component Tests and General
Diagnostics/6T40/6T45 - Automatic Transmission/Service Fast Learn Adapts).