G6 V6-3.5L (2009)
Valve Body: Service and Repair
6T70/6T75 - Automatic Transmission
Control Valve Body Cover Replacement
Control Valve Body Cover Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the oil cooler inlet and outlet hoses from the retainer on the control valve body cover.
3. Remove the engine frame. Refer to Frame Replacement (Convertible) (See: Body and Frame/Frame/Subframe/Front Subframe/Service and
Repair/Frame Replacement (Convertible))Frame Replacement (Coupe 2.4L) (See: Body and Frame/Frame/Subframe/Front Subframe/Service and
Repair/Frame Replacement)Frame Replacement (3.6L) (See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair/Frame
Replacement)Frame Replacement (Coupe 3.5L, 3.9L) (See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair/Frame
Replacement).
4. Remove the front transmission mount. Refer to Transmission Front Mount Replacement (See: Transmission Mount/Service and
Repair/6T70/6T75 - Automatic Transmission/Transmission Front Mount Replacement).
5. Remove the lower nuts from the left transmission mount. Refer to Transmission Mount Replacement - Left Side (See: Transmission
Mount/Service and Repair/6T70/6T75 - Automatic Transmission/Transmission Mount Replacement - Left Side).
6. Drain the transmission. Refer to Transmission Fluid Replacement (See: Service and Repair/Removal and Replacement).
