G6 V6-3.5L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the valve body bolts (374-381, 384).
*
Tighten the M6 X 1.0 X 20 bolt (381) to 8 Nm (70 lb in).
*
Tighten the M6 X 1.0 X 30 bolt (376) to 12 Nm (106 lb in).
*
Tighten the M6 X 1.0 X 45 bolt (377) to 12 Nm (106 lb in).
*
Tighten the M6 X 1.0 X 55 bolt (378) to 12 Nm (106 lb in).
*
Tighten the M6 X 1.0 X 60 bolt (375) to 12 Nm (106 lb in).
*
Tighten the M6 X 1.0 X 65 bolt (374) to 12 Nm (106 lb in).
*
Tighten the M6 X 1.0 X 85 bolt (384) to 12 Nm (106 lb in).
*
Tighten the M6 X 1.0 X 90 bolt (379) to 16 Nm (12 lb ft).
*
Tighten the M8 X 1.0 X 90 bolt (380) to 25 Nm (18 lb ft).
6. Install the oil pump. Refer to Oil Pump Replacement (See: Fluid Pump/Service and Repair).
Note: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The engine control module (ECM), powertrain
control module (PCM) or transmission control module (TCM) will need to relearn TAP values. Transmission performance may be affected as new
TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions (See: Description and Operation/4T65-E - Automatic
Transmission/Transmission Adaptive Functions).
7. Install the case side cover. Refer to Control Valve Body Cover Replacement (See: Control Valve Body Cover Replacement).
