G6 V6-3.5L (2009)
1. Position the cage (2) so that the larger radius corners of the cage windows are up.
2. Position the inner race 90 degrees to the centerline of the cage.
3. Insert the inner race through the bottom of the cage.
4. Align the lands of the inner race with the windows of the cage.
5. Move the inner race land into the cage window.
6. Rotate the inner race down and remove it from the cage.
7. Rotate the inner race within the cage so that the grooved surface of the inner race is facing up.
8. Align the inner race ball bearing tracks with the cage windows.
9. Wrap a clean shop towel around the CV joint outer race splined shaft.
10. Place the outer race vertically in a bench vise.
11. Position the cage (1) and the inner race at 90 degrees to the centerline of the outer race.
12. With the inner race and the cage assembly in a vertical position, insert the cage and the inner race into the outer race.
