G6 V6-3.5L (2009)
1. Position the level sensor seal (3) to the washer solvent container (1), pressing in until fully seated.
2. Position the washer solvent level sensor (4) to the washer solvent container (1), pressing in until fully seated.
3. Connect the washer solvent level sensor electrical connector.
4. Install the left front fender liner. Refer to Front Fender Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
5. Fill the washer solvent container with washer solvent.