G6 V6-3.5L (2009)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Solvent Container Replacement
Windshield Washer Solvent Container Replacement
Removal Procedure
1. Open the hood.
2. Disconnect the solvent container washer hose (1) from the windshield washer hose (2).
3. Drain the washer solvent from the washer solvent container.
4. Remove the front fender liner. Refer to Front Fender Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service
and Repair).
5. Disconnect the washer level sensor electrical connector (1).
6. Disconnect the washer pump electrical connector (2).
7. Remove the washer solvent container nuts (3).